hi all.. as the title says, this will be the demo car for my buisness...

equipment list =

alpine 106e single din flip out screen
alpine h701 processor..
alpine rux c701 processor control unit..
400bt bluetooth unit..
iphone/ipod lead for videos etc...

amps =

jl audio 300/4 x 4..
each amp bridged for 150rms at 11-14.4v regulated power supply..
one amp wont be brindged and will run the front 4 inch splits @ 75rms each side, and centre channel @ 75rms.. 1 ch will go un-used..

one amp will run the midbass @ 150rms each side.. another will run the rear door splits @ 150rms each side, and the last amp will run the splits in the hatch lid @ 150 rms each side..

SPEAKERS =

focal 4inch splits in A-pillars..
8 inch jl audio zr800 midbass in front doors..
rear doors will have 6.5inch K2P focals, and the same set of splits in the hatch lid for demoing purposes.. the amp running those splits will have a switch in the trigger wire and turned off when not in surround sound mode or i want just front stage for SQ..

subs will be 4 x 12inch jl audio W6..

two batteries.. one is a d34 optima up front and the other a d31a optima in the rear.. all stinger wiring and fuse/distro blocks etc etc..
stinger 200 amp isolator..

total of 7 screens.. one in each head rest.. the head unit one in dash, and two in hatch area..

heres some pics to date..

the builds been a slow one due to this being my own car and being done on weekends and after hours when possible..

enjoy,

Brad..




PS.. just realised i need to photobucket these pics.. so ill add them in abit..

http://www.fiberglassforums.com/show...470#post163470

link to the discussions thread...

just fyi..

the rings that are screwed to the tp of the rings that are a part of the box will form part of the fibreglass cover panel that will sit over everything and ill eventually frame around the amps and this will be fleeced to aswell..

so basically you remove the subs screws, take the subs out and remove the whole cover off the rear of the car... those boxes wont be touched any further then they are.. the cover panel will be trimmed and have painted inserts done in there aswell as some other bits and peices..



cheers, thanks for looking,

Brad..

hi guys.. ive been on holidays for the past few weeks.. so i got abit of work done on the mazda, in between doing a couple of jobs for friends of mine.. here it is as it sits now.. im working on it tomorrow too, so ill post pics tomorrow night... its getting there finally..

abit rushed at times, and this is evident by the mis calculation i made, when setting up the mdf amp panels.. one of them was 10mm out.. lop sided.. but i was able to fix it, and once the amps are mounted youll never know it was even like that...

so anyways, heres the car, and the seats are in now.. getting all the fab work done, then wiring, then trimming everything and putting it together = finished....

and a couple of pics of the job i did ( a quicky) for some mates of mine...
















theres more shape and angle to these doors then it looks..

by the way... im planning to build a bridge type thingy across the hatch area mold... to house some splits for show purposes.. cant have the hatch open and no sound coming from it, just bass... anyone has any ideas for the install, PLEASE feel free to tell me what your thinking...

ive got a few ideas, but more are welcome..

thanks for looking guys.. ive learnt alot from this site...

Brad..

heres some more updated pics guys.. enjoy.. any questions, feel free to ask...

the speakers are focals, they are mounted the same way as the fronts, with an mdf baffle, and the door trim pops off leaving the mid in place still...

thinking of things to do to the rear of the car, in the hatch area, as i feel its looking abit plain and boring still.. any advice, thoughts, comments, PLEASE comment and tell me what you would do if it were your car... i have alot of thoughts on this, but keep chainging my mind...

i was thinking about a bridge type set up, with some splits built into it, so it would be a sealed tube style pod, volume wouldnt matter too much, as long as its big enough, i can always fill it abit... but it would be sealed.. other then that, i was just thinking perhaps some insert trim panels to break up the trim areas?? thoughts on this pls??

thanks for looking,

Brad..