MY BAD didnt realize i double posted the question

when fiberglassing do i need to go around the edges or just go right on top of it-
that back corner is a crazy angle and cant get it to adhere well with out air bubbles forming

1st thing I want to mention is staples. They should touch. So in other words, you need more. Might not have needed them this time, but in more complicated pulls, it will help you out.

2nd, I think it is dependant on the situation, but I would attempt to get some 'glass on the edges. If it starts to bubble or you suspect it will, tear it into smaller peices or pull it apart. You really shouldn't have any issues with those corners.
Take your time.

k i will remember that on the staples next time

ya i tried a few times on the edges and it bubbled
so if i do lots of small pieces i can get the edges?
should i do like 8-9 layers on the corner also i assume i should but maybe not

thanks again for the help