| What is CA Glue |
| Cyanoacrylate is the generic name for substances such as ethyl-2-cyanoacrylate, which is typically sold under trademarks like Superglue and Krazy Glue, and 2-octyl cyanoacrylate or n-butyl-cyanoacrylate, which are used in medical glues such as Dermabond and Traumaseal. Cyanoacrylate adhesives are sometimes known as "instant adhesives". The acronym "CA" is quite commonly used for industrial grades. This glue in our industry is commonly used with an activator for fast bonding. |
| What kind of resin should I use. |
| For general fabricating you would use a polyester layup resin.
For carbon fiber you would use an epoxy resin. |
| What is a milkshake |
| I put in 16oz of body filler + 7oz of resin...... mix well. Then add 5cc of MEKP hardener and mix again.
If it is over 90 degrees out, less MEKP.
This mixture is just a little less liquid than latex paint.
this is poured over your fiberglass project and because of the thinned out filler it becomes self leveling making sanding easier. |
All times are GMT -4. The time now is 10:50 PM.
